p.5712025 Nonresidential Appendices NA7.6.5.2 Functional Testing
p.571For buildings with up to seven (7) enclosed spaces requiring demand responsive controlled receptacles, an Acceptance Test Technician shall test all spaces.
p.571For buildings with more than seven (7) enclosed spaces requiring demand responsive controlled receptacles:
p.5711. An Acceptance Test Technician may either:
p.571a. Test all of the spaces; or
p.571b. Test seven spaces and sample the additional spaces; with each sample to
p.571include a minimum of 1 enclosed space for each sample group of up to 7 additional enclosed spaces.
p.5712. If the first enclosed space with a demand responsive controlled receptacle in a sample group passes the acceptance test, the remaining building spaces in the sample group also pass. If the first enclosed space with a demand responsive controlled receptacle in the sample group fails, the Acceptance Test Technician shall test rest of the enclosed spaces in that group.
p.571If any tested demand responsive controlled receptacle fails, it shall be repaired, replaced or adjusted until it passes the test.
p.571The acceptance test for each demand responsive controlled receptacle includes testing the reduction in receptacle power due to the demand responsive control using both of the following methods:
p.571(a) ON Test
p.5711. Trigger the shut off control to turn the demand responsive controlled receptacle ON, or if the receptacle has a manual control turn the receptacle ON.
p.5712. Verify each controlled outlet has full voltage (125 V) present.
p.5713. Simulate a DR condition.
p.5714. Verify at each controlled outlet that zero voltage (0 V) is present (deenergized).
p.5715. Verify the controlled receptacle cannot be overridden to turn ON by the automatic shut-off controls or any manual control.
p.5716. Simulate a normal condition (non-DR condition).
p.5717. Verify each controlled outlet has full voltage (125 V) present.
p.571Appendix NA7 – Installation and Acceptance Requirements for Nonresidential Buildings and Covered Processes