RA2.4.1 Builder

p.3032025 Residential Appendices (c) The ECC-Rater shall confirm that registration of the Certificate(s) of Compliance and the

p.303applicable Certificate(s) of Installation has been completed for each dwelling unit that requires verification. The ECC-Rater shall complete the applicable field verification and diagnostic testing as specified in Section RA2.6. The ECC-Rater shall submit the required field verification and diagnostic testing information and signatures electronically to the ECC-Provider data registry to register the applicable Certificate of Verification documentation.

p.303(d) The ECC-Provider shall make available registered copies of the Certificate(s) of Verification

p.303to the ECC-Rater, builder, enforcement agency and other authorized users of the ECC- Provider data registry. If a building owner is identifiable, the ECC-Provider shall make available registered copies of the Certificate(s) of Verification to that person.

p.303(e) The enforcement agency shall not approve a dwelling unit until the enforcement agency

p.303has received the required registered Certificate(s) of Verification, posted at the building site for review in conjunction with requests for final inspection for the dwelling. The ECC- Provider shall make document verification services available, to enforcement agencies, builders and contractors, ECC-Raters, the Energy Commission, and other authorized users of the ECC-Provider data registry. The ECC-Provider shall ensure that the content and approval signatures for copies of submitted Certificate(s) of Compliance, Certificate(s) of Installation, and Certificate(s) Verification are retained as specified by Title 24, Part 1, Section 10-103.3.

p.303RA2.4 Summary of Responsibilities

p.303Section RA2.4 summarizes responsibilities set forth in Appendix RA2 and organizes them by the responsible party. This section is not, however, a complete accounting of the responsibilities of the respective parties.

p.303RA2.4.1 Builder

p.303The builder shall make arrangements for submittal of the Certificate of Compliance information and certification signatures to the ECC-Provider data registry for dwelling units with fe atures that require verification. The builder shall make arrangements for the services of a certified ECC-Rater prior to installation of the features, so that once the installation is complete the ECC-Rater has ample time to complete the field verification and diagnostic testing without delaying final approval of the building permit by the enforcement agency. The Builder shall make available to the ECC-Rater a copy of the Certificate of Compliance that was approved/signed by the building designer or owner and submitted to the enforcement agency.

p.303The builder or subcontractor responsible for the installation shall complete and sign all applicable Certificates of Installation to certify that the installation work meets the requirements for compliance credit shown on the Certificate of Compliance and that all applicable field verification and diagnostic test results reported on Certificates of Installation are accurate. The builder or subcontractor shall post a copy of all applicable Certificates of Installation at the construction site for review by the enforcement agency in conjunction with requests for final inspection for each dwelling unit. Alternatively, the enforcement agency may elect to view the certificates on an

p.303Appendix RA2– Residential Field Verification and Diagnostic Testing Documentation Procedures