NA1.7.2 Requirements for Data Collected by a Third Party Quality Control Program

p.4822025 Nonresidential Appendices (c) Automatically confirm the location of the system undergoing testing using an electronic

p.482tracking means such as Global Positioning System (GPS) technology if available.

p.482(d) Provide data checking analysis to evaluate the validity and accuracy of the collected

p.482data to independently determine whether compliance has been achieved. Data checking based on more detailed data than is required for showing compliance must be able to uncover invalid or erroneous information supplied by installers.

p.482(e) Provide direction to the installer to retest and correct problems when data checking

p.482determines that compliance has not been achieved. The direction to the installer shall occur in real time so that testing can be redone, and corrections can be made before the installer leaves the site.

p.482(f) Ensure the installer resubmits updated data from new testing when retesting and

p.482correction is completed.

p.482(g) Maintain a database of all data submitted by all participating TPQCP installers.

p.482(h) Provide functionality that enables Energy Commission staff to query retained TPQCP

p.482data or documents.

p.482(i) TPQCP shall not impose restrictions on the ECC-Rater or the ECC-Provider that limit

p.482their independence, or the ability of the ECC-Rater or the ECC-Provider to properly perform their functions.

p.482(j) TPQCP shall not impose restrictions on the ECC-Rater’s use of equipment beyond

p.482those required by the Energy Commission.

p.482NA1.7.2 Requirements for Data Collected by a Third Party Quality Control Program

p.482TPQCP data collection shall conform to the following requirements:

p.482(a) Data shall be more detailed than the data required for showing compliance with the

p.482Standards.

p.482(b) Data shall enable the TPQCP to conduct an independent check on the validity and

p.482accuracy of the installer’s claim that compliance has been achieved.

p.482(c) Data shall not be alterable by the installer to indicate that compliance has been achieved

p.482when in fact compliance has not been achieved.

p.482Appendix NA1– Nonresidential Verification, Testing, and Documentation Procedures