NA1.6 Procedures – Verification, Testing, and Sampling

Figure on PDF page 477
p.477 Needs alt text review

p.477At the builder’s or owner’s option, field verification and diagnostic testing shall be completed either for each system or dwelling unit, or alternatively for a sample from a designated group of systems or dwelling units. Field verification and diagnostic testing for compliance shall use the diagnostic procedures in Reference Nonresidential Appendix NA2. If the builder or owner elects to demonstrate verification compliance utilizing group sampling, the applicable procedures described in NA1.6.2, NA1.6.3 and NA1.6.4 shall be followed.

p.477NA1.6.1 Procedures - General Requirements

p.477The general requirements in NA1.6.1 are applicable to all measures that require verification for compliance and shall be incorporated into procedures specified in Sections NA1.6.2, NA1.6.3, and NA1.6.4 whenever applicable.

p.477The builder or subcontractor shall make available to the ECC-Rater a copy of the Certificate of Compliance approved/signed by the system designer/builder or owner, a copy of the Certificate of Installation as described in NA1.4, and a copy of the Certificate of Acceptance as described in NA1.5. Prior to performing field verification and diagnostic testing, the ECC- Rater shall confirm that the Certificate of Installation and the Certificate of Acceptance have been completed as required, and that the installer’s diagnostic test results and all other Certificate of Installation and Certificate of Acceptance information indicate compliance consistent with the Certificate of Compliance.

p.477The ECC-Rater shall perform all applicable field verification and diagnostic testing.

p.477If field verification and diagnostic testing determines that the requirements for compliance are met, the ECC-Rater shall submit or make arrangements for submittal of the Certificate of Verification information to the ECC-Provider data registry.

p.477Authorized users of the ECC-Provider data registry that are not certified ECC-Raters may provide documentation author support to facilitate submittal of the Certificate of Verification information to the ECC-Provider data registry on behalf of the ECC-Rater when such facilitation has been authorized by the ECC-Rater. Documentation authors shall provide an electronic signature to the Data Registry to certify the documentation is accurate and complete.

p.477The Certificate of Verification shall be electronically signed by the ECC-Rater who performed the field verification and diagnostic testing services to certify that the information provided on the Certificate is true and correct.

p.477A completed signed registered copy of the Certificate of Verification shall be posted at the building site for review by the enforcement agency in conjunction with requests for final inspection. Alternatively, the enforcement agency may elect to view the certificates on an approved Data Registry.

p.477The ECC-Provider shall make document verification services available, to enforcement agencies, builders and contractors, ECC-Raters, the Energy Commission, and other authorized users of the ECC-Provider data registry.

p.477Appendix NA1– Nonresidential Verification, Testing, and Documentation Proceduresp.478

p.4782025 Nonresidential Appendices NA1.6.2 Procedures - Initial Field Verification and Diagnostic Testing