SECTION 110.0 – SYSTEMS AND EQUIPMENT—GENERAL

p.165SUBCHAPTER 2 ALL OCCUPANCIES—MANDATORY REQUIREMENTS FOR THE

p.165MANUFACTURE, CONSTRUCTION AND INSTALLATION OF

p.165SYSTEMS, EQUIPMENT AND BUILDING COMPONENTS

p.165SECTION 110.0 – SYSTEMS AND EQUIPMENT—GENERAL

p.165Sections 110.1 through 110.12 specify requirements for manufacturing, construction and installation of certain systems, equipment, appliances and building components that are installed in buildings within the scope of Section 100.0(a).

p.165(a) General Requirements. Systems, equipment, appliances and building components shall only be installed in a

p.165building within the scope of Section 100.0(a) regulated by Part 6 only if:

p.1651. The manufacturer has certified that the system, equipment, appliances or building component complies with the applicable manufacturing provisions of Sections 110.1 through 110.12; and

p.1652. The system, equipment, appliance or building component complies with all applicable installation provisions of Sections 110.1 through 110.12.

p.165(b) Certification Requirements for Manufactured Systems, Equipment, Appliances and Building Components.

p.1651. Appliances that are within the scope of Section 1601 of the Appliance Efficiency Regulations shall only be installed if they have been certified to the Energy Commission by the manufacturer, pursuant to the provisions of Title 20 California Code of Regulations, Section 1606; or

p.1652. Systems, equipment, appliances and building components that are required by Part 6 or the Reference Appendices to be certified to the Energy Commission, which are not appliances that are within the scope of Section 1601 of the Appliance Efficiency Regulations, shall only be installed if they are certified by the manufacturer in a declaration, executed under penalty of perjury under the laws of the State of California, that:

p.165A. All the information provided pursuant to the certification is true, complete, accurate and in compliance

p.165with all applicable requirements of Part 6; and

p.165B. The equipment, product, or device was tested using the test procedure specified in Part 6 if applicable

p.1653. The certification status of any system, equipment, appliance or building component shall be confirmed only by reference to:

p.165A. A directory published or approved by the Commission; or

p.165B. A copy of the application for certification from the manufacturer and the letter of acceptance from

p.165the Commission staff; or

p.165C. Written confirmation from the publisher of a Commission-approved directory that a device has been

p.165certified; or

p.165D. A Commission-approved label on the device.

p.165SECTION 110.0 – SYSTEMS AND EQUIPMENT—GENERAL

p.166SECTION 110.0 – SYSTEMS AND EQUIPMENT—GENERAL